FAQ

Q&A eSenlite ( EE101WLS): Invisible Motion Activated Retrofit Lamp Socket

Q1: Is it a light bulb with radar sensor?

A: No, EE101WLS It is not a light bulb; it is a radar sensing retrofit socket and compatible with

most existing E26 or E27 light bulbs or light fixtures and adds them with “SMART” mode without

the need for APP control and Wi-Fi connection.

Q2: Is this for outdoor and/or indoor use?

A: The EE101WLS is add-on-able for most new or existing indoor & outdoor lighting fixtures

built with E26/E27 including wall, ceiling, table, floor, and decorative lighting fixtures, etc. It

makes the regular light become smart sensing lighting with energy-saving functions without any

replacement.

Q3: What is the “SMART-MOONLIGHT” mode? Why do I need this mode?

Set dip-switch S5 ON to activate “SMART/SMART-MOONLIGHT” mode. It is highly

recommended and designated for security and safety purposes while utilizing low power

consumption assuring the light illuminating area is not completely dark as a safety concern!

(1W/80 lumens under fixed as dimed profile when no motion is detected). The soft glow

moonlight brightness creates a neighbor-friendly and light pollution-free atmosphere during

nighttime. Not worrying about light being too bright that disturbs your own home or neighbor’s

peace, while having safety and eco-friendly environment.

Q4: Can I skip the “SMART” mode, I don’t need a dim profile.

A: EE101WLS comes with “SMART” and “AUTO” modes. The default setting is “SMART” mode.

You have the option to select your preferred mode. “AUTO” is traditional motion sensing

functionality with adjustable illumination time (delay time) and detection range.

Q5: Do I need to manually turn on / off the light? Does it work in daylight?

A: eSenlite EE101WLS is built with a photocell sensor, you can keep it powered on all the time

and the light will be automatically operated in function during nighttime or in darkness conditions,

therefore, you don’t need to manually turn on/ off the light.

Q6: What is a radar sensor and what are the benefits?

A: The radar sensor is built of an invisible and very high-frequency radio generator sensor, that

is capable of penetrating most non-metallic materials such as walls, glass, wood, plastics, and

some metallic screen structures, excluding solid metal. It detects the movement behind these

materials and activates the light socket, Making your original lamps/fixtures “SMART”

Illuminating dark areas before you enter, and worry free from “forgetting to turn off “afterward. It

helps save energy and consumption by up to 98% without the need to replace the existing light

fixture for other types of sensing light. It can also increase the lifespan of light bulbs by 2-3 times.

Q7: Can I adjust the illumination time and detection range?

A: Yes, you can. The EE101WLS allows adjusting of illumination time (delay-off time) 5sec,

30sec, 60sec, and 120sec. Detection range covering up to 26Ft radius with 360-degree

coverage. Suggestion: 30sec for indoor and 60sec for outdoor, 13ft for indoor and 19ft for

outdoor.

PAGE 1
Q&A eSenlite ( EE101WLS): Invisible Motion Activated Retrofit Lamp Socket Q1: Is it a light bulb with radar sensor? A: No, EE101WLS It is not a light bulb; it is a radar sensing retrofit socket and compatible with most existing E26 or E27 light bulbs or light fixtures and adds them with “SMART” mode without the need for APP control and Wi-Fi connection.
PAGE 2
Q8: Does this radar Frequency used by this product affect my Wi-Fi? A: No. EE101WLS uses the frequency of 5.8GHz in the ISM band, which is approved to use in the USA by FCC or Europe CE. It does not interfere with or affect your Wi-Fi 5.0GHz. Q9: What is the Warranty of this EE101WLS? A: We offer 2 years limited warranty for this radar sensor light socket. Our product is created, designed, and quality-controlled by our US team. Our goal is to ensure 100% customer satisfaction.
PAGE 3
second unit from illuminating because the second sensor's photocell detects the light and stops its function. To solve this issue, simply place a piece of paper between (set it side of inside the light fixture) the two radar sensors to reduce/block the light. Once the photocell of the second sensor no longer detects light from the first sensor, it can start working properly. 2. I feel that the detection of my movement path is not very sensitive.