Operating instructions

Dole – Drivers Reference Manual
Page 45
4.4.3 Starcool SCI-40 and SCU-40
START-UP PROCEDURE.
The start-up procedure ensures that the system is
started safely after the following events:
 Unit has been out of use
 Main Failures
 Defrosting
 PTI test
 Service Mode
 Alarm mode
The start-up procedures has 5 modes :
1. Initialize: Self check controller.
2. Stabilize: The evaporator fan operates
at high speed to ensure that the
temperature sensors are at current
temperature.
3. Crank Case Heating: If Temp. is lower
than 2C(36F) heat is applied until Temp. is above 12C(54F).
4. Ramp Up.
5. Terminate: Switching to normal temperature and valve regulation.