Quick Reference Guide
2. On your smartphone, go to Bluetooth settings.
3. Ensure Bluetooth is on.
4. Tap Scan for Devices or wait for the Devices list to populate. ESCORT Max 360 should appear
under devices.
5. Tap ESCORT Max 360 to pair the device to your phone. The Bluetooth icon on the detector will
appear blue when paired to your phone.
6. Open the ESCORT Live! App, walk through the tutorial, and you’re ready to hit the road!
For Bluetooth pairing tips and more information on using ESCORT Live! visit EscortRadar.com.
Installation
ESCORT Max 360 comes with our new Magnetic Mount feature. Simply slide the detector all the way
onto the mounting bracket, and that’s it. To remove, gently pull the detector off the mounting bracket.
Mounting Tips
Place in center of windshield between driver and passenger.
Ensure clear view of road ahead and sky above.
Avoid windshield wipers and heavily tinted areas.
To mount the detector in your vehicle:
1. Remove backing from StickyCup mount.
2. Firmly press StickyCup onto windshield and flip locking clamp to secure.
3. Slide the detector onto the mounting bracket until it’s fully engaged. The magnet inside holds
the detector in place.
4. To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel
to secure.
5. To remove detector, gently pull it off the mounting bracket.
6. To remove mount from windshield, release locking clamp and pull tab on top of StickyCup.
Sticky Cup Care Instructions
To clean Sticky Cup, rinse under warm water, gently wipe off any debris and allow to air dry.
Controls & Features
Using ESCORT Max 360
Plug small end of SmartCord into modular jack on ESCORT Max 360 and large end of SmartCord into
your vehicle’s lighter/accessory socket. ESCORT Max should power on automatically. If not, press the
device’s power button.
NOTE: You can easily access and customize all of your Settings & Preferences by pressing and holding
the BRT and SEN buttons. See Settings & Preferences for details.
Using SmartCord
Mute Button
o Press to mute an alert
o Press three times to lock out a false alert