Owner's Manual

The manufacturer is not responsible for any accidents,
property damage, or injuries that occur while using
the Performance Computer.
Like your car’s speedometer, this device is no more than
a measuring instrument, a tool that can be used to
measure vehicle performance. Obey all traffic laws on
the street. Drive responsibly, and use common sense.
ROLLOVER WARNING
This device measures G-Forces, but it does not change
the laws of physics. Under certain circumstances,
almost any vehicle can roll over, causing serious injury
or death. Taller vehicles such as SUVs, trucks, and vans
are more likely to roll than conventional cars, so even
more care needs to be taken with those vehicles.
No electronic device can take the place of the driver’s
judgment.
One-button Operation 3
Quick Start Guide 4-5
Remote Control Cord 6
Installation 6-7
How it works 8
Specifications 8
G-Meter Operation 9-15
Performing Timed Runs 16-19
Measuring Horsepower 20-23
Using the Setup Mode 24-30
Optional Accessories 31
Troubleshooting 32
Warranty 34
Service 35
One-button operation
G-METER OPERATION
Press and release G-METER button
to display G-Forces. Press again to
choose alternate G-Meter displays.
3
IndexWARNING
2
To enter Setup Mode, hold this button
To adjust display brightness, hold this button
G-METER CALIBRATION
Install unit on windshield,
park on level ground, then press
and release CALIBRATE button.
REVIEW TIMED RESULTS
Press UP or DOWN buttons
to review data from
last ten timed runs.
TIMED RUN OPERATION
Stop car,
press TIMED RUN button,
then start anytime.