Product Manual

WARNING

BE SURE SETUP IS STABLE BEFORE LIFTING LOAD.

– The cylinder should be placed on a flat surface that can support

the load. Where applicable, use a cylinder base for added

stability. Do not weld or otherwise modify the cylinder to

attach a base or other support.

– Avoid situations where loads are not directly centered on the

cylinder plunger. Off-center loads produce considerable

strain on cylinders and plungers. In addition, the load may slip

or fall, causing potentially dangerous results.

– Distribute the load evenly across the entire saddle surface. Tilt

saddles are available to reduce offset loading (except 100

ton models). Always use a saddle to protect the plunger

when threaded attachments are not used.

WARNING

USE ONLY RIGID PIECES TO HOLD LOADS. Carefully

select steel or wood blocks that are capable of supporting the

load. Never use a hydraulic cylinder as a shim or spacer in any

lifting or pressing application.

WARNING

ONLY USE HYDRAULIC CYLINDER IN A

COUPLED SYSTEM.

Never use a cylinder with unconnected couplers. If the cylinder

becomes extremely overloaded, the coupler check ball and/or

hydraulic oil may shoot out of the cylinder causing severe

personal injury.