User`s manual

PAGE 56
FireBall™ SE-80 User’s Manual
Photo Screen Saver Mode
FireBall has a Photo Screen Saver Mode for displaying your own photos whenever FireBall is idle
foraspecifiedperiodoftime.YoucanimportyourownphotosintothePhotosshareddirectory
usingWindowsNetworking.Photosshouldbe720x480for4:3NTSCTVsand640x360for16:9
widescreenTVs.
Follow these steps to enable the Photo Screen Saver Mode in your FireBall:
1. Press the SETUP key on the remote.
2. Select the General menu.
3. Select the Screen Saver menu.
4. Select the Photo Viewer option and the number of minutes to wait before
displaying the next photo.
5. Select Random or Alphabetical ordering.
6. Select the Save button.
Note: You can set the Photo Interval or how long each photo is displayed as well as the
Photo Order or how you want to display your photos, in random or alphabetical order.
• ThePhotosScreenSaverwillbeactivatedwhenevertheFireBallisidleforthespecified
period of time.
• Donotsettheidletimetoohighasthepossibilityofscreenburnisincreasedwithcertain
types of displays, particularly “Plasma” type displays.