User`s manual

PAGE 28
FireBall™ MX Series User’s Manual
MULTI-ZONE VIDEO OUTPUTS
Mulit-Zone FireBalls have several video output formats and connectors including:
Main Zone
•ComponentVideo
•S-Video
•CompositeVideo
Remote Zone (connects to an MP-200)
•ComponentVideo
•S-Video
•CompositeVideo
All video outputs are active at the same time, so
you can use as many as you like without causing
signal degradation. However, the corresponding
video input from the changer must also be
connected to watch a movie from the changer on
that video output.
TheComponentVideooutputwillprovidethe
best possible video quality for the FireBall User
Interface, but will require that your video system
has an available component input.
TheS-Videooutputistypicallyusedforthe
optional Escient ETP-1500 touch panel to provide
the user interface directly on the touch panel.
The composite output is typically used for an a/v
distributionsystem,suchastheXantechAV-61or
theNilesZR-4630/8630distributionsystems.
5 CHANGER BACK PANEL