User Manual

Page 10
seconds of inactiv i ty, the Eclipse Touch will automatically exi t the
adjustment mode and return to normal operation.
To turn off Line-Markers or Blanking: If either the line-markers or the
blanking have been enabled, the relevant icon in the menu wil l be
replaced with one showing an “X”. Pressing this icon will remove the
line or shutter.
Pressing the top centre of the screen will also quickl y disable or re-
enable the li ne or shutters
6C. Semi-colours:
By defaul t the Eclipse Touch displays the high contrast modes in
black and white. Some users may benefit from setting the ink
and paper to colours other than black and white. The Eclipse
Touch offers a user-definable option where the ink and paper colours
may each be cho s en from any of eight fore- and background colours.
The colour options only operate in the high-contr ast reading modes.
You can c han ge the “ink” colour by press i ng the and icon
and change the “paper” c olour by pressing the and icon.
Note that you cannot display the same colour for ink and paper.
If you do not press a key for five seconds the Ec l ipse Touch will
automatically e xit the colour selection mode. To return to the default
black and white c olours, press the icon.
6D. Settings Menu
The settings men u allows access to some rarely used functions.
Selecting this menu item will restore all video settings,
modes, colours and button functions to their factory
settings. This option is provided in case you set the unit