System information

WS620 IPPhone
www.escene.hk
Escene Communication
the following parameters
-Enable account: choose Enable
-Account Mode: you can choose VOIP,
-Display Name: The name displayed on the screen
-User Name: the account matched with the SIP server.
（extension number），
-Authen usr: the Authenticated users matched with the SIP
server.（The default With the same account）
-user pwd: the user password matched with the SIP server
-Description: description of this account，
-SIP1: the primary SIP server，By default all calls through the
server，
-SIP2: the secondary SIP ， When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
is 20 The default value is 3600.
-Con type: the protocol use to communicate with SIP server.
-Amount of used lines: the lines the extension used,can use
1-8,default is 2.
--5）Set up the above parameters，Press softkey to saves
settings，Complete the account creation；
* Note: the parameters with the * mark must be set.
Disable sip account --1) Choose “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Choose “SIP” > “Account sip”；
--4) Choose “Enable account” > “Disable”；
--5）Press soft key