Instruction manual

Need advice? Give us a call on 01869 331741 More online: www.eos-magazine-shop.com
14 15
HÄHNEL GIGA T PRO – WIRELESS
Great for time-lapse photography, such as blooming flowers, and action shots, the Giga
T Pro can also be used as a simple wireless remote. It has the advantage that line-of-sight
is not required to fire the camera. It is also
ideal for wildlife photography, long exposures,
astrophotography and studio sessions.
Programmable features include a self-
timer, interval timer, long exposure timer
and exposure count settings, which can be
combined. Timer sequences are available
from 1 second up to 99 hours. The Giga T
Pro provides autofocus and shutter release,
continuous shooting and bulb mode with a
100m range. The 2.4GHz frequency is licence-
free worldwide.
Two camera connectors are supplied to suit
all EOS DSLRs (N3 and E3 connections).
REF: R195 £74.99
APUTURE REMOTE TIMER - WIRED
This wired digital
remote timer
will give you
precise control
over scheduled
shutter release,
exposure length
and frequency. It
provides delayed
shutter release
to the second,
intermittent
release, time
exposure and
continuous shooting to preset limits. The
time can be preset from 1 second to 99
hours. Settings are viewed on a clear 1.2
inch LCD screen which can be illuminated
in dark environments. A dial enables you to
enter settings easily with just your thumb.
Power consumption is low, using one
CR2032 (3V) cell battery. It works as a
simple shutter release without a battery.
The cord is 80cm long and the unit weighs
only 105g, measuring (LxWxD) 15.4 x 4 x
1.8cm.
AP-TR1C with E3 connector
AP-TR3C with N3 connector
REF: K038 £29.99
Remote Release
SIMPLE SHAKE-FREE SHOTS
Put a little distance between you and the
camera with this cable remote release.
It can be used up to 0.8 metre from
the camera, or up to 2.8 metres with
the supplied extension lead. It allows
autofocusing before shutter release and
a lock for continuous release
and bulb exposure function.
This accessory is ideal for
shake-free firing of your
camera on a tripod. The
remote now also features a
‘twist & lock’ system making
the connection between cable
and remote much easier and
more secure.
Two camera cables are
supplied to suit all EOS
digital cameras (N3 and E3
connections).
REF: R194 £21.95
Power panner
MOVE YOUR CAMERA
FROM A DISTANCE
A power panner is an
electric base unit which
allows you to pan and tilt
your camera remotely.
It is ideal for wildlife
photography, but can
be used for many other
subjects. It is especially
useful when used with a
remote viewing screen
like the CamRanger.
The panner head is controlled via a hand
unit connected to the panner by a one-
metre cable. However, six-metre extension
cables are available and can be linked
together to create a much longer cable. We
include a free six-metre cable with the unit;
extra cables can be purchased separately.
The tilt angle is ±15° with a pan angle of
±90°. These movements are controlled by
a 4-way rocker switch on the remote. The
speed of the movement is controlled by a
slider switch on the remote. The maximum
recommended camera weight is 2700g,
so all EOS digital and film cameras can be
used (but check the weight if a heavy lens
is fitted to the camera). Power is supplied
from four AA batteries (not included).
MP-101 Power Panner with six-metre cable
REF: R356 £139.99
Additional six-metre cable
REF: R387 £15.99
Remotes
If you have a tripod you
need a remote release.
It eliminates the risk of
camera movement as you
press the shutter button.
Wireless releases serve
the same purpose, but
can also fire the shutter
from a greater distance.
This is useful for wildlife
photography where you
set the camera close to the
subject’s haunt and keep
watch from afar.
Timer remotes
Timer remote releases are perfect for sequences recorded from the same place over a set
time frame. Using a timer remote gives you complete control over the interval, frequency
and length of exposure. We have both a wired and wireless solution to choose from. For
more information on setting up your camera for time lapse, take a look at the article in the
April-June 2009 issue, pages 54-9.
Two other bits of equipment need to be taken into consideration when shooting at
intervals over a long time frame. Make sure you have a good size memory card and that
your battery is fully charged. Shooting one frame every 30 seconds over a ten-hour period
will result in 1,200 images. It’s also a good idea to turn off features which drain the battery
quickly, like the auto review facility.
Which connector?
E3 cable
EOS 60D, 70D, 100D, 300D, 350D, 400D,
450D, 500D, 550D, 600D, 650D, 700D,
1000D, 1100D, 1200D, D30, D60, 30, 33,
50, 300, 500.
N3 cable
EOS 10D, 20D, 20Da, 30D, 40D, 50D,
7D, 6D, 5D, 5D Mark II, 5D Mark III, 1D,
1D Mark II, 1D Mark II N, 1D Mark III, 1D
Mark IV, 1Ds, 1Ds Mark II, 1Ds Mark III,
1D X, 3, 1V
Canon RC-6
LINE-OF-SIGHT REMOTE
This remote controller
fires your camera up
to 5 metres away (from
front of camera or by
bouncing the beam off
a solid surface towards
the camera). Compatible
cameras have the wireless
receiver built-in as
standard. Comes with two
modes – immediate and 2-second delay.
This handy remote can also be used
to start and stop movie recording when
filming with the EOS 60D, 70D, 100D, 650D
or 700D. Ideal for self and group portraits,
or as an alternative to a remote switch.
Supplied with pouch. Compatible with
EOS 5D Mark II, 5D Mark III, 6D, 7D, 60D,
70D, 100D, 300D, 350D, 400D, 450D,
500D, 550D, 600D, 650D, 700D, M.
REF: A382 £16.99
TriggerScout PIR kit
LONG-RANGE HEAT-SENSING TRIGGER
Some subjects simply move too fast to be captured successfully even with standard
infrared beam-breaking triggers. The TriggerScout overcomes this by letting your subject’s
heat signature trigger your camera via a passive infrared sensor. With a maximum range
of 20 metres the TriggerScout will detect moving heat and trigger within a minimum of
1/5 second. There are three sensitivity settings – full, half or quarter so that you can adjust
according to ambient temperature and the heat signature of your subject.
The sensor can be connected directly to your EOS camera’s remote trigger socket or
can be connected to the TriggerSmart MCT-1 control unit (not supplied) for increased
control over sensitivity and timing delay. Powered by 2 x AA batteries (not included) or self-
powered when connected to an existing TriggerSmart system. The sensor has a low power
consumption so good batteries should last around 100 hours.
The TriggerScout kit includes the PIR (passive infrared) sensor, weatherproof cover,
stakepod, 3-metre cable and 6° baffle to narrow the cone of sensitivity. We also supply a
Canon-specific cable adapter to make the kit work with all EOS cameras. For maximum
effectiveness and ultimate control over the activation area the TriggerScout can be used in
pairs. This means that the sensor will only trigger when both zones are activated. Similarly
this can be achieved by using the TriggerSmart IR sensor or TriggerBeam Pro which are all
available separately.
TriggerScout with additional Canon cable
REF:K129 £124.99
new
IR Remote Trigger
LET YOUR SUBJECT FIRE THE SHUTTER
Take the difficulty out of capturing moving subjects with this infrared remote trigger from
Hama. Part of their comprehensive DCC Remote System, the IR remote trigger consists
of two units. The transmitter sends a continuous infrared beam to the receiver and the
units can be positioned up to 5 metres apart (depending on ambient light conditions); an
extension cable connects the receiver to the remote control socket of the camera. The two
units which create the beam have an integrated 1/4 inch tripod thread.
When the subject breaks the infrared beam the camera shutter fires. With the trigger
doing all the work, once you have set up the shoot you can stand well away so as not to
disturb your subject. We supply this with one camera trigger cable – choose the correct
connection type for your camera. The additional cable is available separately.
With N3 connector / E3 connector
REF: R879 £79.95
5 metre extension cable
REF: R886 £12.95
CamRanger PT Hub
TILT AND PAN YOUR CAMERA WIRELESSLY
Extend the capabilities of your CamRanger with the PT Hub. This neat little accessory works
with the power panner head MP-101 (right) and allows you to control the movement of the
power panner from within the CamRanger app. This means that you can move your camera
via pan and tilt motions remotely and so keep your subject in the frame at all times. And
then if you need to refocus the camera to compensate
you have all the controls at your fingertips within the
same app. Requires CamRanger and MP-101 power
panner head, both sold separately.
As well as the obvious application for advanced
capture of wildlife, the Hub is also useful for
panoramas and video capture. You can control the
speed, angle and movement of the panner head, all
wirelessly. It will also allow you to create moving
time-lapse photography. Because the power panner
head offers smooth movement and there is no need
to touch the camera, the results achieved look highly
professional.
REF: K136 £119.99
new
CamRanger
TAKE CONTROL OF YOUR EOS WIRELESSLY
The CamRanger provides wireless control of your
EOS camera via a free dedicated app on your iPad,
iPhone or iPod Touch and now also on your Android
handheld device or from your Mac (PC version
in beta). It enables you to shoot still or
video images, view and change camera
settings (shutter speed, ISO etc), focus,
shoot at intervals and transfer images all
at a distance of up to 50m (150ft). You can
wirelessly stream Live View to your device
– great for when your camera is placed in
remote locations such as bird hides. Also suitable for macro photography with its touch
focusing, fine focus control and focus stacking features. And there is no need for a nearby
WiFi network as the CamRanger creates its own ad-hoc network. This gives you complete
freedom out in the field.
Once you have captured your images you can view, download and delete images from
your camera’s memory card – all remotely and wirelessly. You can bring up the images full-
screen and zoom into the full resolution of the JPEG and RAW files to check exposure and
composition. A live histogram will help you check correct exposure.
The CamRanger attaches to your EOS camera via a single cable and comes supplied
with a soft black pouch which can be used to hang the device securely on your tripod. Also
includes an ethernet cable for firmware updates and USB-rechargeable (and replaceable)
Li-Polymer battery. Battery life varies with usage but is typically 3-6 hours. Spare batteries
are available separately. Dimensions 10cm x 6cm x 1.5cm; weight 115g.
Compatible with EOS-1D Mark IV, 1Ds Mk III, 1D X, 1D C, 5D Mark II, 5D Mark III, 6D, 7D,
40D, 50D, 60D, 70D, 450D, 500D, 550D, 600D, 650D, 700D. Not all features given above are
available for all listed EOS cameras – please check the website for more information.
REF: K037 £269.99