Instruction manual

Need advice? Give us a call on 01869 331741 More online: www.eos-magazine-shop.com
28 29
DSLR brush
This high-
quality brush
attracts dust.
Clean the brush
with a blast of
compressed air
to increase the
static attraction.
Supplied in a
handy storage
tube with three
chamber swabs
and instructions. Also useful for dusting
down external areas of your equipment.
REF: R021
£22.95
COMPREHENSIVE ALL-IN-ONE KIT
You never know how stubborn that bit of dust is going to be. Rather than trying to
predict which cleaning method will shift it, make sure you have the only kit you need to
cover all scenarios. It includes tools for all three steps in the cleaning process – blow,
brush, swab – all in one compact travel pouch.
Start with the silicone blower, move onto the DSLR statically-charged brush and then
blitz the dust with the wet swab solution. There are full instructions packed in the pouch,
but if you need more advice take a look at the article available online.
Contents include:
– One 59ml bottle of cleaning fluid
– Three camera chamber swabs
– Ten micro-fibre sensor swabs
– DSLR sensor brush
– Silicone jumbo blower
– Pack of 25 PEC Pads (for lens cleaning)
– Large microfibre cleaning cloth
– Comprehensive instructions
Available in three sizes – check your sensor size
REF: R012 All kits £78.95
ECLIPSE fluid
ECLIPSE sensor cleaner
dries as quickly as it can be
applied leaving no residue,
making it safe for use on
all sensor types, lenses
and filters. Bottle contains
approx. 59ml fluid and
comes with a dropper tool
to dispense as needed.
REF: R813 £12.95
Micro-fibre swabs
Included as standard in our sensor cleaning kits
these DSLR swabs are manufactured using extremely
soft and highly absorbent lint-free micro-fibre cloth
to produce a superior cleaning action. The design
incorporates a stiff handle with a flexible blade tip
which makes it easy to apply the correct pressure
when cleaning. Use with Eclipse fluid for best results.
Each swab is individually sealed in a foil packet for
single use. Supplied in packs of 10.
REF: R164 £28.95 per pack
Sensor cleaning kits & refills
Blower bulb
This powerful silicone blower
is odourless and provides
a good blast of air to shift
specks of dust from your
sensor and camera body.
Being made of silicone means
it is far less likely to degrade
than rubber so you don’t risk
contaminating your sensor
further with debris.
The blower has a soft
silicone tip making it safe to
use inside your camera. It can stand upright
on its flat base to keep the nozzle from
making contact with dirty surfaces.
REF: R163 £5.85
Lens cloth
A lint-free microfibre cloth for cleaning all optical glass.
Packed in a protective case and washable. 15.5 x 15.5cm.
REF: R225 £2.95
PEC PADS
An ideal companion
for Eclipse fluid for
cleaning lenses,
designed for single use.
The wipes are non-
abrasive and lint-free.
Each sheet measures
10 x 10cm. Supplied in
a pack of 25.
REF: R814 £5.95
Clean
Whilst dust on the sensor
can cause problems with
your images, it shouldn’t
be the only part of your
camera to clean. A clean
camera helps keep the
sensor free from dust.
All of our sensor cleaning
kits come supplied
with comprehensive
instructions on how to
clean your sensor safely.
IDEAL STARTER KIT FOR WET CLEANING
This mini kit offers a low-cost wet sensor cleaning pack, ideal for those just starting out
with wet sensor cleaning or people looking for a small self-contained kit to pack in their
camera bag. Wet cleaning should only be undertaken after dry sensor cleaning methods
to ensure that all loose particles are removed prior to swabbing.
The kit includes a 10ml bottle of Sensor Solution
cleaning fluid, five individually wrapped swabs and a
comprehensive step-by-step guide for using the cleaning kit.
The Sensor Solution is fast evaporating and non-flammable.
It is effective on oil, grease and stubborn dust particles
and safe for use on all sensors. The five swabs are sized
specifically for your camera sensor and are soft and lint-free.
They are manufactured in a clean room environment and
individually sealed for one-time use. You should follow the
comprehensive instructions included inside the kit to ensure a
safe and effective clean.
Available in three sizes – check your sensor size
REF: K080 All kits £17.95
Which sensor size?
Type 1: APS-H (x1.3)
EOS-1D, 1D Mark II, 1D Mark II N,
1D Mark III, 1D Mark IV
Type 2: APS-C (x1.6)
EOS 7D, 10D, 20D, 20Da, 30D, 40D, 50D,
60D, 60Da, 70D, 100D, 300D, 350D, 400D,
450D, 500D, 550D, 600D, 650D, 700D,
1000D, 1100D, 1200D, M, D30, D60
Type 3: Full frame (x1.0)
EOS-1D X, 1Ds, 1Ds Mark II, 1Ds Mark III,
5D, 5D Mark II, 5D Mark III, 6D
Protect
The LCD monitor on
the back of your digital
camera is vulnerable to
scratches. A protective
screen will help to keep it
safe and is much cheaper
to replace if any damage
occurs. We keep our
Canon gear wrapped in
Magic Cloths for extra
protection, even in the
equipment cupoboards.
Snug-It Pro
RUGGED SILICONE CAMERA SKINS
Heavy duty for heavy use, Snug-It Pro skins are
custom designed for a glove-like fit. All buttons,
dials, sensors and compartments are carefully
moulded over and around for a completely
functional yet rugged skin. Sockets for plugs and
compartments for batteries, cards etc. have flaps
over them, allowing for easy access. The ridges,
text and graphics mimic the Canon-specific details
on the camera body so you can still see and feel
your way around the camera and buttons with ease.
The skins are made from powder-infused silicone which is specially formulated to resist
debris collecting on the surface. This material offers both a smooth texture and a secure
grip on your Canon EOS camera. The Snug-It also helps reduce camera noise, particularly
important when shooting video. Not suitable for use when a battery grip is attached. Also
includes an LCD screen protector in the box for complete protection.
EOS 40D
EOS 50D
EOS 60D
EOS 400D
EOS 450D/500D
EOS 550D
Magic cloth
Magic? We think so! At EOS magazine we use
these oversized microfibre cloths for carrying
equipment in bags and cases. This large square
two-layer cloth is an excellent accessory to
protect delicate optical equipment. The inner
layer is manufactured from a soft microfibre
lens cleaning cloth to avoid any possibility of
scratching the equipment. On each corner is
a Velcro tab which attaches anywhere to the
reverse side. Large enough to wrap an SLR with
lens attached. Measures 52 x 52cm.
REF: R998 £10.95
EOS 600D
EOS 1100D
EOS 7D
EOS 5D Mk II
EOS 6D
EOS 100D
EOS 700D
EOS 5D Mark III
EOS 70D new
REF: R313
all models £29.99 each
Larmor protectors
SELF-ADHESIVE SCREEN PROTECTION
Larmor LCD Protectors provide superior shock
absorbency and scratch protection for your camera’s
LCD. Larmor protectors adhere to the LCD via
electrostatic adsorption. This self-adhesive design
means the end of annoying sticky marks and glue
left behind from the more common stick-on style
protectors. This method of fixing also means that you
are not left with annoying bubbles under the surface.
Featuring a protection system manufactured
from optical glass, layered with anti-explosion and
anti-breakage film to ensure maximum strength and
protection. Touch screens continue to work.
Larmor protectors are made from 0.5mm optical
glass, which allows for 90% light transmission, making
the protectors ultra clear and ultra thin. They are easy
and quick to put on and are supplied with a super soft
wet cleaning cloth. At EOS magazine we have fitted the
Larmor protector on our EOS 650D and almost forgot
it was on there. The vari-angle LCD screen still folds
inwards and clicks into place without impediment.
EOS M
£16.95
EOS 600D
£16.95
EOS 650D
£16.95
EOS 700D new £17.95
EOS 100D new £17.95
EOS 60D £17.95
EOS 70D new £17.95
EOS 7D £17.95
EOS 6D
£17.95
EOS 5D Mark II
£17.95
EOS 5D Mark III
£17.95
EOS-1D X
£24.95 REF: K018
Larmor screen protector being
fitted to EOS 600D (above) and
the finished result (below).
Stuck?
Need to remove a stick-on
protector? Try using dental
floss to slice through the
adhesive. We have seen
other advice, suggesting
you use a hairdryer, which
we do not recommend.
GGS Removeable
LCD Protectors
Our bestselling screen protector. All
the advantages of an optical glass
screen protector, but not permanently
attached to your camera. The GGS
screen protector comes with a built-in
viewfinder eyecup mount. Remove the
camera’s eyecup and slip the accessory
in place. The screen protector is held
firmly in position without any adhesive.
Easy to fit, remove and refit as needed.
Eyepiece attachments can still be used.
EOS 5D Mark II
£19.95
EOS 5D Mark III
£19.95
EOS 6D
£19.95
EOS 7D
£19.95
EOS 40D/50D
£19.95
EOS 450D/500D
£19.95
EOS 550D
£19.95
EOS 1100D
£19.95
EOS-1D Mark IV
£35.95
REF: R458
A GGS screen
protector (below)
fits discreetly onto
the back of an EOS
camera (left).
• 0.5mm thin optical glass with
at least 90% optical transmission
• Glass specially treated for
hardness and durability
• Covered with explosion-proof
film for max resistance to impact
• Supplied in durable plastic
case for storage when not in use