Instruction manual

Need advice? Give us a call on 01869 331741 More online: www.eos-magazine-shop.com
24 25
Lens keeper caps
WITH CENTRE RELEASE GRIP
With the release grip in the centre, these
caps are easy to remove when a hood is
attached to the lens.
The keeper cord is
elasticated and slips
over the lens barrel.
52mm, 58mm,
67mm, 72mm,
77mm, 82mm
REF: R279
£2.99 each
LensBling rear caps
QUICKLY LOCATE THE LENS YOU NEED
LensBling are a series of rear lens caps
that enable you to quickly and easily
differentiate between your lenses. The
bright, bold labelling of the lens focal
length on the caps puts an end to the
frustration of quickly finding the right
lens. By speeding up your lens selection,
LensBling caps increase the promise of
capturing every shot.
To fit the following Canon lenses:
EF 24mm
EF 24-70mm
EF 50mm
EF 85mm
EF 70-200mm
REF: R486 £8.50 each
Lens Band
STOP LENS CREEP
A simple device for reducing zoom
creep on zoom lenses. Stretch the Lens
Band over the lens and position it on the
zoom ring when not in use. To ‘lock’ the
lens, move half of the Lens Band over to
the non-moving part of the lens barrel.
Dimensions: 62 x 12 x 2 mm (diameter x
width x thickness).
Black / red
REF: R484 £5.49
dri+Cap
PROTECT YOUR LENS FROM HUMIDITY
Excess humidity can be destructive to
equipment. Fungus that forms between
lens elements and on glass surfaces in
humid dark environments is either difficult
or expensive to remove. The dri+Cap
system helps to maintain equipment
at the proper RH (relative humidity)
levels – ideally between 35% and 45%.
The dri+Cap absorbs moisture that can
otherwise turn into mould, particularly
relevant when travelling in climates with
heavy temperature changes.
Each dri+Cap has a compartment
which holds a sachet of dessicant. Four
sachets are provided in the kit and
extra sachets are available separately.
Simply insert a fresh sachet into the cap
compartment. Screw the compartment lid
on to seal the cap. Now install the cap and
the rubber ‘O’ ring ensures an air-tight
seal against the mount flange on either
the lens or camera body. Be sure to check
the dessicant sachet at regular intervals.
When the indicator gels have turned from
orange to green, replace the sachet with
a fresh one. Fits all EOS cameras and EF/
EF-S lenses
Body cap & rear lens cap kit £26.95
Body cap kit £15.95
Rear lens cap kit £15.95
Dessicant refill sachets (8 pack) £4.95
REF: K043
Canon lens caps Mk II
NEW & IMPROVED WITH CENTRE PINCH
Replacement
Canon lens caps,
complete with
Canon logo. The
mark II versions
now feature centre
pinch catches,
making it much
easier to remove
and replace the
cap when you have
a hood fitted. Issued as standard with all
new lenses from early 2013 onwards.
E52 II (52mm)
REF: A409 £9.99
E67 II (67mm)
REF: A404 £9.99
E77 II (77mm)
REF: A405 £9.99
We also stock other original Canon caps
including rear lens caps (common to all
Canon EF and EF-S lenses), body and
extender caps and specialist lens caps.
Lens dust cap E (for all EF/EF-S lenses)
REF: A189 £3.95
Lens dust cap EB (for all EF-M lenses)
REF: A423 £4.95
RF-3 body cap
REF: A190 £3.95
EII Extender Cap
REF: A188 £4.95
Your lens cap not listed? There are
more available online or call for details.
Caps
Lenses are delicate
items and need looking
after. Dirt, grime and
moisture all impair the
performance of your lens.
We have already fitted
the driCaps to the lenses
in the EOS magazine
office as they are stored in
a 400 year-old building
which is prone to damp.
Lens Guard
IMPACT PROTECTION
Working like a car bumper, this soft, robust
cover will protect your lens from bumps,
scratches and bent filter rings. The outer
thermoplastic rubber absorbs impact
while the 6mm thick inner neoprene layer
is water resistant and a soft cushion for
your lens. Both materials are stretchy so
the Lens Guard will hug your lens and stay
put. Simple but effective, adding minimal
weight to your kit (max 70g).
A built-in tether attaches to the camera
to keep the Lens Guard within easy reach
when not in use – it will simply hang down
below your lens. Quick and easy to put on,
it will also fit when you have a filter or lens
cap attached (but not over a lens hood).
Small – 63-76mm diameter £19.95
Medium – 74-88mm diameter
£19.95
Large – 86-100mm diameter £27.95
REF: R363
Viewing
Get a clear view of what
you are photographing to
ensure your composition
and focus are correct,
whether it is on the LCD
screen or through the
camera’s viewfinder.
Viewfinder extender
KEEP CLEAR OF THE CAMERA BACK
Moves eyepiece
back 15mm for more
comfortable viewing.
Takes your standard
Canon eyecup – see
below if you need a
replacement. Also helps
to keep your nose clear
of the LCD monitor,
reducing grease and smears. Can also
be used with dioptric correction lenses.
If not available for your camera, a
suitable alternative is the HoodEye.
Fits EOS 100D, 450D, 500D, 550D, 600D,
650D, 700D, 1000D, 1100D
REF: A315 £14.95
Canon eyecups
If you need a replacement Canon
eyecup look no further.
Eyecup EB for EOS 5D, 5D Mark II, 6D,
10D, 20D, 30D, 40D, 50D, 60D, 70D,
D60
REF: A104 £7.35
Eyecup EF for EOS 100D, 300D, 350D,
400D, 450D, 500D, 550D, 600D, 650D,
700D, 1000D, 1100D, 300V, 300X
REF: A032 £6.85
Eyecup EG for EOS 1D Mk III, 1D Mk IV,
1Ds Mk III, 7D, 5D Mk III
REF: A028 £10.99
Hoodman HoodEYE
COMFORT FOR EITHER EYE
HoodEYE is a replacement rubber camera eyecup designed to improve viewfinder
clarity. In sunny conditions your view can be hampered by varying levels of stray light
entering the viewfinder. HoodEYE allows your eye to fit much closer to the camera for
improved viewing. The cup rotates to accommodate both left and right eye shooting. The
eyecup itself is made from hypoallergenic silicone rubber. A self-locking mount keeps
the HoodEYE in place so you know it’s exactly where you left it. And if you wear glasses,
there are also models (G) designed for you.
HoodEYE 22 / HoodEYE 22G for EOS 5D Mk III,
7D, 1D/1Ds series
HoodEYE 18L / HoodEYE 18LG for EOS 5D,
5D Mark II and 1100D
HoodEYE 18 / HoodEYE 18G for all other EOS
digital and film models except EOS 3, 30, 30V,
33, 33V, 5, 50, 50E
REF: R192 £22.99
Dioptric lenses
NO NEED FOR SPECTACLES
If you wear glasses, it can be difficult to
see all of the viewfinder image clearly. A
correction lens may help. The lens slips
over the existing eyepiece lens so that
you can view the image without wearing
your glasses. Available in ten strengths
from +3 to –4. Can only correct eye
defects of long and short sight.
Call for more information or go
online. We offer a return service if
you wish to try several strengths.
HoodLoupe
CRYSTAL CLEAR VIEW OF LCD SCREEN
If you spend a lot of time reviewing still
images or video on your EOS, then this
accessory will make a real difference to
you. HoodLoupe Professional is worn
around your neck just like a normal loupe.
When it is time to review your shot, bring
your HoodLoupe up to your camera’s LCD
screen and place your eye to the cup for
complete glare-free viewing.
Hoodloupe has an adjustable dioptre to
accommodate those with less than perfect
vision. HoodLoupe adjusts focus just like a
binocular eyepiece - you turn the eyepiece
in or out to set for your vision. Minimal
magnification is used to eliminate visual
pixelation of your image. To protect both
the camera and HoodLoupe and to make
it comfortable to use, the HoodLoupe is
surrounded by rubber. Comfortable lanyard
and compact protective storage case
included.
Now available in three versions:
HoodLoupe 3.0 for 3-inch screens;
HoodLoupe 3.2 for 3.2-inch screens and
Compact HoodLoupe 3.2 – a collapsible
model which condenses to 50% of its
original size, useful when space is all-
important.
HoodLoupe 3.0
£74.99
HoodLoupe 3.2 new £94.99
Compact 3.2 new £104.99
REF: R170
Want a way to attach
the HoodLoupe to
your EOS camera?
Try the Cinema strap
– a perfectly-sized
rubber strap which
holds the loupe in
place over the LCD
screen. It’s easy to
attach and remove
as needed, without any permanent fixing or
marks left on the camera.
REF: R772
£12.99
Aputure V-Screen
ADD SEVEN INCHES TO YOUR VIEW
If you struggle sometimes with the size of
the images and menu items on your LCD
screen, or you just need a bigger screen
to work with for your video or stills, then
this is an affordable solution for you. This
seven-inch digital LCD monitor, designed
for photographers and videographers, is
slim and lightweight. It is simple to operate,
features multiple video inputs and works
from both battery and AC mains supply.
The base of the monitor is fitted with a
standard ¼” tripod socket, allowing the
monitor to be easily mounted on a range
of equipment. A ball-and-socket hot shoe
adapter is included so you can mount the
monitor on top of your EOS camera.
V-Screen is easy to operate via front
panel buttons and a menu system. There is
a dedicated button to switch video inputs
and a four-way controller allows direct
control of brightness and contrast without
entering the menu.
Included in the box is a sturdy
folding fabric sun shade, useful in bright
conditions. The display itself is 800 x 480
pixels and supports video up to 1920 x
1080. Video inputs include HDMI, AV and
YPbPr. An internal speaker allows you to
listen to playback sound, with the option to
use headphones. An HDMI to mini HDMI
cable is included as is a USB cable which
can be used to install firmware updates.
The monitor can be powered by AC
mains or lithium-ion battery (both power
sources included). The battery can also
be recharged using the supplied mains
adapter. Dimensions: 182 x 138 x 23mm,
weight 380g.
REF: K030 £129.95
Cap combo
REAR LENS AND BODY CAP PAIR
If you are forever losing
your body and rear lens
caps, then help is at hand.
At this price for both it
won’t be such a shock
when you have to replace
them! A simple ‘C’ adorns
the front.
For all EOS cameras and
EF/EF-S lenses
REF: K031 £2.99
new
new