User manual

www.escene.cn/en/
Escene Communication
15
15
Transferring Calls
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to... Then...
Talk to the transfer
recipient before
transferring a call
(consult transfer)
--1) Press XFER soft key under the LCD;
--2) Enter number;
--3) press “#” default) ,
-or press Send then transfer the call,
-or wait five seconds(default)then transfer the call
Transferred to idle
lines or other numbers
without talking to the
transfer recipient
(Blind transfer)
--1) Press XFER soft key under the LCD;
--2) Press Blind;
--3) Enter number;
--4) Press “#” default)
-or press Send, then transfer the call;
-or wait five seconds(default)then transfer the call
Blind transfer to the
held line
--1) Press XFER soft key under the LCD;;
--2) Press the Line button of held line
Using Mute
With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use
mute in conjunction with the handset, speakerphone, or a headset
If you want to... Then...
Toggle Mute on
Press Mute button, then the button is Red
Toggle Mute off
Press Mute button, then the button light off
Do Not Disturb
You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone Can also be set to their voice mail or other extension numbers, etc.).
www.InternetVoipPhone.co.uk | [e-mail] | 0800 088 48 46