User manual

www.escene.cn/en/
Escene Communication
12
12
network setting
--1) Choose “Menu” > “System setting” > “Advanced setting”
--2) Enter the password required The default is empty)
--3) Choose “Network”, you can configure the following parameters:
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate subnet mask
-GW: enter appropriate gateway
- DNS1: enter IP address of the primary DNS server
- DNS2: enter IP address of the secondary DNS server
-Web port: the default Web port is 80,if you change it(for example
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23,if you change it(for
example change it to 2003),you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
Placing a Call
Here are some easy ways to place a call on SayHi CC800 IP Phone:
If you want to... Then...
Place a call using the
handset
Pick up the handset
--1) You can hear the dial tone
--2) The first line light is
--3) Enter a number
--4) Press ‘#’ button default) ,
-or press Send;
-or wait 5s (default), then it send
the number automatically.
Redial
--Press REDIAL button to dial the last number
- “Dialed number”, select a number, and press RD.
www.InternetVoipPhone.co.uk | [e-mail] | 0800 088 48 46