User manual

ES620 IPPhone
www.escene.hk
Escene Communication
-User Name*: the account matched with the SIP server.
（extension number），
-Authen usr: the Authenticated users matched with the SIP
server.（The default With the same account）
-user pwd*: the user password matched with the SIP server
-Description: description of this account，
-SIP1*: the primary SIP server，By default all calls through the
server，
-SIP2: the secondary SIP ， When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value
is 20 The default value is 3600.
--5）Set up the above parameters，Press softkey to saves
settings，Complete the account creation；
* Note: the parameters with the * mark must be set.
Disable sip account
--1) Choose “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Choose “SIP” > “Account sip”；
--4) Choose “Enable account” > “Disable”；
--5）Press soft key
Network Setting
If you want to…
Then…
network setting
--1) Choose “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Choose “Network”, you can configure the following parameters:
-Type: static IP or DHCP