User`s manual

3.18
Query Commands
STATUS QUERY
The status query command enables the user to get all the camera operating
parameter information with a single command.
Type In: Response Explanation
STS? Gives complete camera status with one query. The
following parameters are transmitted with a carriage
return after each parameter:
Response Definition Example
GAB xxxx .. Shows the gain balance setting. ...................................GAB 36
BKB xxxx .. Shows the black level balance setting. ........................BKB 100
BKE xxxx ... Shows black level setting. ...........................................BKE 58
MDE xx ...... Shows the operating mode. ......................................... MDE CS
EXE xx ....... Shows the exposure time ............................................. EXE 58
STP x .......... Show the strobe pulse polarity ....................................STP P
TRM x ........ Shows the trigger logic polarity. .................................TRM P
TRS xxx ..... Selects the trigger source .............................................TRS AIA
TRE x ......... Shows the exposure state. ............................................TRE 1
DGN x ........ Shows the digital gain setting. .....................................DGN 1
AEX xx ...... Shows the auto exposure setting. ................................AEX ON
AXX x ........ Shows the auto exposure horizontal address. .............. AXX 260
AXY x ........ Shows the auto exposure vertical address. ..................AXY 89
BLK xx ....... Shows the block select setting. ....................................BLK ON
BST x ......... Shows the block start address. .....................................BST 1
BSP x .......... Shows the block stop address. .....................................BSP 242
ALT x ......... Shows alternate row select setting. ..............................ALT OF
MDD x ....... Shows the multi-drop select setting. ............................ MDD OF
ADR x ........ Shows the camera multi-drop address. ........................ADR 1
SET xx ........ Shows the auto exposure reference level. ...................SET 64
SCP xxx...... Sets the communications port protocol .......................SCP 232
IDENTIFICATION QUERY
Type In: Response
IDN ? KODAK MEGAPLUS Camera Model ES 310,V1.00
Explanation
Queries the camera for model number and software version.