User`s manual

2.1
Camera
MOUNTING THE CAMERA
The KODAK MEGAPLUS Camera has a 1/4-20 threaded screw hole for
mounting on the bottom of the camera body. There is a second hole,
0.228 inches in diameter, to accommodate a locating pin.
ATTACHING THE LENS
The KODAK MEGAPLUS Camera uses a C-mount lens. To mount the
lens, screw the lens clockwise into the adapter until you are no longer
able to turn the lens with light pressure.
NOTE
A lens cap is installed and shipped with each camera to keep dust from getting
on the optical sensor or components. Remove the lens cap and install your lens
in a dust free environment.