User manual

ES310 IPPhone
www.escene.hk
Escene Communication
number) ,
-Authen usr: the Authenticated users matched with the SIP server.
（The default With the same account)
-user pwd*: the user password matched with the SIP server
-Description: description of this account,
-SIP1*: the primary SIP server, By default all calls through the
server,
-SIP2: the secondary SIP , When the primary server is
unavailable ,use the SIP server
-Refresh time: Registration refresh interval, the minimum value is
20 The default value is 3600.
--5) Set up the above parameters, Press softkey to saves
settings, Complete the account creation；
* Note: the parameters with the * mark must be set.
Disable sip account
--1) Choose “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Choose “SIP” > “Account sip”；
--4) Choose “Enable account” > “Disable”；
--5) Press soft key
Network Setting
If you want to …
Then…
network setting
--1) Choose “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Choose “Network”, you can configure the following parameters:
-Type: static IP or DHCP
-IP: enter IP address , Note: Do not duplicate the IP address with
other devices on the network
-Mask: enter appropriate subnet mask