User manual

www.escene.hk
Escene Communication
7
2.Connecting Your Phone
Your system administrator will likely connect your new 3xx Series IP Phone to the corporate IP
telephony network. If that is not the case, refer to the graphic and table below to connect your
phone.
1) Open the 3xx series IP Phone box; carefully check the packing list, Packing List as
follows:
Item Counts
IP Phone 1
Handset 1
Handset Cord 1
Power adapter 1
RJ45 cable 1
CD 1
Quick Installation 1
Quick User Guide 1
Product certification 1
2) As shown in figure 2.1 and figure 2.2, Please plug Handset Cord into RJ11 interface(IP
Phone and Handset), RJ45 cable into the LAN interface IP Phone will automatically start if IP
Phone with POE function.
3) The phone must work together with power adapter without POE support.
4) Connect your computer to PC interface of the phone with cable.
* More detailed description please refers to the 3.Phone overview-Understanding phone
buttons and hardware.
Figure 2.1 Interfaces of SayHi 3xx Series
www.InternetVoipPhone.co.uk | [e-mail] | 0800 088 48 46