User manual

www.escene.cn/en/
Escene Communication
14
Place a call using a
speakerphone
Press Speaker,
or Programmable buttons
--2) The first line light is
--3) Enter a number
--4) Press ‘#’ button default) ,
-or press ;
-or wait 5s (default), then it send
the number automatically.
Place a call using a
headset
Put on your headset and active
Headset button, and then do as
using speakerphone
Redial
--Press REDIAL button to dial the last number
-or press Navigation button-Right > “Dialed number”, select a
number, and press
Dial from a call log
--1) Press MENU or OK button > “Call history”, you can select
“Missed calls”, “Received calls” and “Dialed numbers”,
- or press Navigation button (in Standby interface) > select “Missed
calls” (down), “Received calls” (left) and “Dialed numbers”
(right) )
--2) Then press button.
Place a call while
Another call is active
--1) Press Hold button or soft key ;
--2) Press again the line one or the other line , you can enter another
number;
--3) Press ‘#’ button (default) ;
-or press to send the number.
Tips
• You can dial on-hook, without a dial tone (pre-dial). To pre-dial, enter a number, and then go
off-hook by lifting the handset or pressing , Headset or Speaker button.
• If you make a mistake while dialing, press C button to erase digits.
Answering a Call
You can answer a call by simply lifting the handset, or you can use other options if they are
available on SayHi IP Phone .
If you want to... Then...
Answer with a
handset
--1) Your phone ring;
--2) Line button of the ringing
--Pick up the handset
www.InternetVoipPhone.co.uk | [e-mail] | 0800 088 48 46