User manual

ES220 IP Phone
www.escene.hk
Escene Communication
change it to 88),you must use IP and Web port to login the web page (for
example http://192.168.0.200:88).It will take effect on next reboot.
-Telnet port: the default Telnet port is 23, if you change it (for
example change it to 2003), you must use IP and Telnet port to login the
manage page (for example telnet 192.168.0.200:2003).It will take effect
on next reboot.
PC Port
--1) Select “System setting” > “Advanced setting”；
--2) Enter the password required（The default is empty) ；
--3) Select “Network>PC Port”, you can configure the following
parameters:
-Mode :you can select bridge or router
-4) Select “Save” to saves settings
Load default settings
If you want to... Then...
Load default settings
--1) Choose “System settings” > “Advanced
settings”；
--2) Enter the password required（The default is
empty) ；
--3) Select “load default settings”, and
press ”OK” then “Reboot” the phone.
Modify password
If you want to... Then...
Modify password
--1) Choose “System settings” > “Advanced
settings”；
--2) Enter the password required（The default is