User manual

www.escene.cn/en/
Escene Communication
Load default settings
If you want to... Then...
Load default settings
--1) Choose “System settings” > “Advanced
settings”；
--2) Enter the password required（The default is
empty) ；
--3) Choose “load default settings”, and
press ’OK’, then go back and press “Reboot”
the phone.
Customizing Rings and Volume
If you want to… Then…
Change the ring
tone
--1) Choose “System setting” > “Phone setting” > “Ring type”；
--2) It will auto ringing. Press navigation to choose ring tone；
--3)Press OK to set the ring tone,
Press soft key to cancel
Adjust the volume
level
--1) Choose “System setting” > “Phone setting” > “Volume setting”;
--2) You can adjust the volume level of following types
-Ring volume: Phone call ring volume,
-Handset volume: Handle output volume,
-Handset mic volume: Handle input volume,
-Speaker volume: Hands-free speaker output volume,
-Speaker mic volume: Hands-free input volume,
-Headset volume: Headphone output volume,
-Headset mic volume: Headset microphone input volume
WIFI setting(only WS3xx has this item)
Tips: The WIFI ip phone support 802.11b/g/n, not support 802.11a.