User Manual

6. Prior to bottom plate installation, position the gasket on the bottom

plate recess, ensuring the orientation is correct. Ensure the gasket

chamfer is facing outwards

7. Replace the bottom panel and ensure the gasket is rmly in place.

Secure the panel using the four M5 screws.

8. During the bottom plate installation, ensure that there are no visible

gaps between the top plate and frame. This can occur if the gasket gets

trapped.

NOTE: If there are any gaps large enough to t your ngernail through,

then the bottom panel should be re-assembled. The gasket should be

re-aligned to make sure that it does not get trapped between the top

plate and frame.

Gasket

No visible gap