User Manual

3.3 POWER ON/OFF
1. Power on the skates and remote by holding
the Power Switch for 2 seconds, until the light/
indicator turns on.
2. Repeat the same steps for powering o the
devices
Note: You can power on the devices in any
sequence
3. Once all of the devices are powered on, the
remote should be connected to both skates
and show its “DEFAULT SCREEN” state (speed,
battery charges, driving direction and etc.)
If the display screen shows “DISCONNECT”
error, proceed to “3.4 CONNECTING & BINDING”
instruction
Power
Switch
B1 B2
00
R
km/h
T : --------, --km
O : --------, --km
1
DEFAULT SCREEN
DISCONNECT
SCREEN
Thumb Throttle
12