User guide

Basic Operation

The ST900 remote control allows you to turn ON and OFF the fire, control the

flame height in the Manual mode, or control the room temperature in the

Thermostat mode. The remote has a maximum range of 10 meters, and

because the remote works by radio frequency, it does not need to be aimed at

the for it to operate.ST900

When first powered the remote starts at the OFF screen (it is possible that the

remote is locked in the OFF screen: to unlock it just press the button below

Unlock, and then OK).

Switching on the ST900

Switching on: Once the remote is unlocked, press On (left button) and OK

(middle button). A beep from the control unit will be heard, and the ignition

process starts (the pilot will start sparking and gas will start flowing to the pilot,

which should then be lit within a few seconds).

If the pilot flame fails to ignite, you must turn OFF the from the remote

and start the process of turning it ON again.

ST900