GAS FIREPLACE USER GUIDE ST900 NORTH AMERICA Ce manual est disponsible en Français sur demande www.escea.
Any installation or service work carried out on this appliance must only be done by a licenced or qualified service person. The data plate for this appliance, containing technical information and specifications, can be found to the right of the control tray, near the base of the fireplace. To access this, the fascia must be removed. Escea recommends the ST900 is inspected and serviced by a licenced or qualified service person once every twelve (12) months.
Contents > Basic Operation Turning the ST900 on Setting the Control Mode Locking the Remote Control Operation from the touch pad 1 2 5 5 > Clearances 6 > Cleaning and Maintenance 8 > Normal operating Sounds and Smells 10 > Warranty Information 11 The ST900 electronic control system is designed to work within the temperature range of 0°C to 70°C, with a humidity level that is non condensing. This is to ensure safe operation of the electronic and gas control system.
1 Basic Operation The ST900 remote control allows you to turn ON and OFF the fire, control the flame height in the Manual mode, or control the room temperature in the Thermostat mode. The remote has a maximum range of 10 meters, and because the remote works by radio frequency, it does not need to be aimed at the ST900 for it to operate.
Basic Operation 2 Switching off the ST900 To turn off the fire, push the OFF button, to shut down the gas flow to the fire and switch it off. The OFF display will now appear in the display. Setting the control mode for the fireplace: There are three different modes for controlling the appliance: > Manual > Automatic > Program Automatic mode allows you to set a temperature, while in manual mode the flame level may be set to HIGH, MEDIUM, LOW & PILOT.
3 Basic Operation Automatic mode: If Auto is pressed in the initial screen, 25ºC (77 º F) appears as the desired temperature in the selected setting. In the bottom row, ↓ and ↑ appear, indicating that we can change the desired temperature value by just pressing the left or middle button. In auto mode the appliance heats until this temperature is reached. Limits are 0-37ºC (3299ºF). Pressing Back (right button), returns to the initial screen. In this mode the main burner can be switched on and off.
Basic Operation 4 Program mode (continued) The daily program screen consists of: A: Selected (including “Daily”). The selected day can be changed by pressing Change (middle button). B: Day schedule graphic. This bar displays the program for the whole day by showing the temperature setting for each hour of the day. To access the day schedule graphic, press ↓ (left button). To change the desired temperature, go to the hour you want to change by pressing → (left button) and then press change (middle button).
5 Basic Operation To Lock / Unlock the remote control buttons: Go into Menu → Lock. Press middle button and then left button for locking the remote. To unlock pres left button and then middle button. Operation from the Touch Pad The touch pad is intended to be used for service/diagnostic purposes and to operate the fire in the event that the remote handset becomes lost or inoperative. If you remove the fascia you will find an electronic touch pad in the lower centre of the fire.
6 Clearances Cabinet Clearances There must be a minimum of 100mm from the sides of the fascia to any protruding side walls or cabinetry. Television Positioning Considerations It is becoming common practice for consumers to mount flat screen TV's above their gas fireplace. Most TV manufacturers have specified in their instructions that the TV should not be installed on, near or above a heat source.
7 Clearances The material that the wall and mantle are made from will also affect the operating temperature of the TV so it is the customers responsibility to satisfy themselves that their TV mounting and mantle design will not exceed the listed maximum operating temperature of their electronic goods. Replacing Batteries When batteries are replaced in either the battery box (inside the fireplace) or in the handset, the unit will require 1 minute afterwards to regain connection.
Cleaning and Maintenance 8 Annual Servicing Your ST900 Decorative Gas Fireplace requires that annual service checks be carried out by a Registered Installer to ensure that it will continue to operate in a safe manner. Please ensure that you schedule annual service checks for your ST900 with your local Registered Installer or service agent. Removing the ST900 Fascia Ensure the fascia is allowed to cool before handling. The ST900 fascia attaches to the fire by four hooks.
9 Cleaning and Maintenance Follow the instructions on page 8 in reverse to refit the glass assembly to the fireplace. Do not operate the appliance if the glass has been broken, damaged, or the glass is not properly positioned/hooked onto the appliance. Cleaning your ST900 The unit must be cold before starting any form of maintenance or cleaning. The glass can be cleaned using standard window cleaner.
Sounds and Smells 10 Note: Each time the fire is lit from cold the glass will fog up with condensation. This is normal and the condensation will disappear within a few minutes once the glass heats up. Sounds It is possible that you will hear some sounds from your gas appliance. This is perfectly normal due to the fact that there various types of materials used within your appliance. Listed below are some examples.
11 Warranty WARRANTY TERMS & CONDITIONS: LIMITED WARRANTY: Provided that the Product is installed as per ESCEA's Installation Manual and the step by step warranty procedure has been followed as per instructions issued by ESCEA, (documented in the Dealer Manual), and the product is operated and maintained in accordance with ESCEA operating and maintenance instructions, then for the first period of twelve (12) months from the date of purchase ESCEA will pay to the dealer who sold the appliance, a pre-determ
Warranty 3. 4. 5. 6. 12 ESCEA must be notified of all claims under this Limited Warranty as soon as possible, but in any event not later than two (2) weeks of the claimant becoming aware of the circumstance giving rise to the claims. No ESCEA Distributor, retailer, employee or other third party is authorized to make any modification, extension, or addition to this Limited Warranty, whether verbal or written.
13 Warranty following: use; revenue; actual or anticipated profits (including loss of profits on contracts); use of money; anticipated savings; business; opportunity; goodwill; reputation; any or indirect or consequential loss or damage howsoever caused including the replacement or equipment and property. Some states in Canada and in some States in the United States do not allow the exclusion of incidental or consequential damages, so the above limitation may not apply to buyer.
