Installation manual

630167_5_Manual_Installation_US_R-emotion
> Program mode:
By default the program mode is not enabled. To enable program mode, enter configuration
mode by pressing and holding the OFF button for 40 seconds, selecting “Programming” and
selecting “yes” (For more information on configuration mode see section 19.9).
There are two types of program mode: a Daily mode and a Weekly mode. In the daily
mode, every day uses the same program. In the weekly mode, every day has its own
program, so it is possible have a different program for each day of the week.
In this mode the main burner can be switched on and off (pilot still burning).
Day programming menu: (Menu → Adjust Menu → Change Program)
There are 8 menus like this. One for Daily, and the others for each separate day (Monday,
Tuesday, Wednesday, Thursday, Friday, Saturday and Sunday). This day programming
screen consists of:
Daily program:
A: Selected (including “Daily”). The
selected day can be changed by pressing
Change (middle button).
B: Day schedule graphic. This bar displays
the program for the whole day by showing
the temperature setting for each hour of
the day. Each bar on the screen
represents an hour (0 to 24). To access
the day schedule graphic, press ↓ (left button). To change the desired temperature,
go to the hour you want to change by pressing → (left button) and then press
change (middle button).
There are 3 temperature settings (bars):
Off - [Small bar] No temperature control (the appliance is in pilot mode).
Night Temp - [Medium bar] The night temperature is set as the desired temperature
and the appliance will heat until this temperature is reached. To adjust
the night temperature press Menu → Adjust menu → Night and set the
desired temperature.
Comfort Temp - [Large bar] The comfort temperature is set as the desired temperature
and the appliance will heat until this temperature is reached. (High bar).
To adjust the comfort temperature pres Menu → Adjust menu →
Comfort and set the desired temperature.
Finally, to launch the program mode, in the main menu, set Program to On, and select the
desired Program Type (Daily or weekly). When activated, the screen will show which of the
above temperature settings is currently active, Off, Night, or Comfort. The pilot must remain
lit in order for the program to remain running