Installation manual

630288_0_Manual Service ST900 NZ R-emotion
Contents:
DIS-ASSEMBLY - Isolate power and gas supply - 1.0
- Remove facia - 2.0
- Remove glass assembly - 3.0
- Remove firebox contents - 4.0
- Remove Control Tray [if required] - 5.0
SERVICE - Check glass assembly - 6.0
- Clean pilot and main burner jet - 7.0
- Clean burner thermocouple - 8.0
- Paint firebox [if required] - 9.0
- Inspect flue system [if possible] - 10.0
- General clean and inspection - 11.0
RE-ASSEMBLY - Re-assemble - 12.0
- Re-establish gas and electrical
connections - 13.0
- Replace facia - 14.0
TROUBLESHOOTING - 15.0