Installation manual

630288_0_Manual_Installation-Service_ST900_AUS NZ
29
6. Attach the supplied Magnets to brackets installed in step 4 above, using the supplied
nuts and bolts
7. Place lower trim by securing it to the magnet brackets attached in step 3.
18.4 Cleaning the ST900 Fascia:
The fascia must be cold before starting any form of maintenance or cleaning.
If your Stainless Steel fascia requires cleaning, 3M Stainless Steel cleaner (or equivalent) is
recommended.
If your Powder Coated (Painted) fascia requires cleaning, you must only use a damp non-
abrasive cloth to give it a gentle wipe. Never ever rub the fascia.
18.5 To clean the glass, remove it as described in section 11.0 and clean inside and out using
standard window cleaner. Do not allow glass to become excessively dirty as this will be
difficult to remove.
DO NOT ATTEMPT TO CLEAN THE GLASS WHILE IT IS HOT. NEVER OPERATE THE UNIT
WITH THE GLASS REMOVED.