Installation manual

630288_0_Manual_Installation-Service_ST900_AUS NZ
27
2. Fitting the Grill Trim:
Packed in with the fascia kit is the Grill Trim.
Attach this to the fire using the 3 supplied
screws in the positions shown to the right.
The perforated surface (grill) should be on top.
3. The ST900 fascia uses these four hooks for
attaching to the fire. Do this by lining up the
fascia hooks with the receptacles on the sides
of the fire. Lift the fascia so that the hooks are
above the receptacles, and let it drop down into
position until it is secure and free from movement.
Remove all protective plastic and packaging
material before operating the
fire. Care should
be taken when handling the fascia.
To remove the Fascia, lift it upwards briefly, and then
pull towards you. Ensure the fascia is allowed to cool
before attempting to remove it.
→ Continue on to section 19.0