Installation manual
630162_5EF5000InstallationGuideR‐emotion‐US
Important:
The appliance shall be installed in accordance with;
Local gas fitting and building codes, or in the absence of local codes, with the
National Fuel Gas Code, ANSI Z223.1 / NFPA 54
The appliance, when installed, must be electrically grounded in accordance with
local codes or, in the absence of local codes, with the National Electrical Code,
ANSI/NFPA 70. (If applicable)
This appliance must only be installed by an authorized person.
Warning:
The area surrounding the appliance must be clear and free from combustible materials,
gasoline and other flammable vapors and liquids.
This appliance must not be installed or used indoors.
Children and adults should be alerted to the hazards of high surface temperatures and
should stay away to avoid burns or clothing ignition.
Young children should be carefully supervised when they are in the area of the appliance.
Clothing or other flammable materials should not be hung from the appliance, or placed on
or near the appliance.
Any guard or other protective device removed for servicing the appliance must be replaced
prior to operating the appliance.
Installation and repair should be done by a qualified service person. The appliance should
be inspected before use and at least annually by a qualified service person. More frequent
cleaning may be required as necessary. It is imperative that control compartment, burners
and circulating air passageways of the appliance be kept clean.
Do not use this appliance if any part has been under water. Immediately call a qualified
service technician to inspect the appliance and to replace any part of the control system
and any gas control which has been under water.
Under no circumstances should you touch the coals or metalwork during operation.
Contact:
Manufactured by: Escea Ltd, PO Box 5277 Dunedin NZ, Ph: +64 3 478 8220, email: info@escea.com
For further information or advice please contact:
Ph. USA: 1 866 615 3096 Email: info@escea.com










