Service manual

B
ACDEFG
SERVICE
S7 Accessing the control tray
Remove the screws in the bottom and the inner side of the rebox as per shown.
Remove the ‘engine’ by lifting up and to the left. This is still connected internally to the
gas hose and power cables. Place engine just to the left within rebox as shown.
S8 Removing the Circuit Board
Step 1: Remove the Pilot
cover and 2 jets circled to the
right.
Step 2: Remove the 4 screws
circled to the right from the
inside and lift the cover up-
wards to remove it. This will
give you easier access to the
circuit board.