Service manual

B
ACDEFG
SERVICE
46
S6 Replacing the burners
If a fascia is tted, remove this rst.
Using the supplied 3mm Allen Key (hex drive) remove the bolts around the glass retainer
ensuring that the glass does not fall forward.
Pull the top of the frame toward you slightly and lift the glass and frame out and away
from the re. Place the glass & frame carefully aside.
Remove all of the fuelbed, taking care not to damage any logs or media.
Remove the Fuelbed tray from the re box, by lifting one end up into the top corner and
then out towards you. Take care not to scratch the rebox paint and lift out the burners.