Service manual

B
A C D E F G SERVICE
36
F4 Fitting the Rado Fascia Panels
Step 1: Ensure the glass and all glass retainers are
securely tted. Note: If the glass gasket requires
a replacement, call your nearest Escea agent
who will ensure the part is replaced with the
correct type. In the event that the glass is broken
by impact, purchase the replacement from an
authorised Escea agent only.
Step 2: Attach the Rado Outer Fascia Bracket to
the top lid as shown below. Note: Ensure the cor-
rect orientation of the bracket. If the bracket is
installed upside down, the fascia will not t.
Step 3: Fit the Rado Outer Fascia brackets to the
bottom left and right sides of the appliance as
shown below.
STEP 8
STEP 8