Service manual
B
ACDEFGSERVICE
35
Step 6: Screw the Inner Fascia to the bottom left and right of the rebox as shown below.
Step 7: The Outer Fascia is now tted over the top of the Inner Fascia. Hang the Outer
Fascia (larger one) from the 30 degree ange at the top of the replace, being very care-
ful not to damage either the Inner or Outer Fascias as there is not a lot of room to t the
Outer over the Inner. Once the Fascia is hung on this ange and clear of the Inner Fascia it
will swing down and press rmly into place.
TAKE CARE: When securing the outer fascia, ensure it does not hit the inner fascia.
Step 8: Once it has clipped onto the replace check that the Fascia is parallel with the
wall. The fascia installation is now complete.