USER MANUAL Slide-out Rangehood 60cm MODEL: ESL60D2S
CONTENTS PAG E SECTION 4 Welcome Section 5 General Safety 7 Product Overview 8 Installation 12 Operating Instructions 13 FAQ 14 Other Useful Information 16 Purchase Details 17 Warranty 3
Residentia Group — Head Office 118 Campbell Street Collingwood, VIictoria Australia 3066 — ACN. 600 546 656 — Online. residentia.group Dear Customer, Congratulations on purchasing your new rangehood. The Esatto brand is proudly distributed within Australia by Residentia Group Pty Ltd. Please refer to the warranty card at the rear of this manual for information regarding your product’s parts and labour warranty, or visit us online at www.residentia.
GENERAL SAFETY Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card and purchase receipt. If applicable, pass these instructions on to the next owner of the appliance.
CAUTION: Do not touch the light bulbs after the appliance has been used as they may be hot. Let them cool down before cleaning and maintenance. General Safety Continued Usage restriction: This rangehood is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
PRODUCT OVERVIEW 1 2 3 4 7 7 5 KEY 6 1 2 3 4 5 6 7 7 Rangehood housing Slide-out Front Fascia Rail Inner Aluminium Grease Filter Outer Aluminium Grease Filter On/Off Switch Fan Speed Switch : /(' /DPS
I N S TA L L AT I O N Installation Kit The installation kit contains the following parts: Part ID Description Illustration 1 Rangehood 1 2 Rear-underside support mounting bracket 1 3 Screws (ST4 x 30mm) 6 4 Screws (ST4 x 8mm) 2 5 Wall Plugs (8mm) 6 6 Flat Washers 6 7 Front Vent Cover —If external ducting selected 1 8 Flu Outlet Adapter 1 8 Qty
Unpacking • This product has been packaged to protect it against transportation damage. Unpack the appliance and remove all packaging materials from around the rangehood. Keep all packaging materials until you have made sure your new rangehood is undamaged and in good working order. The carton is recyclable. Whenever possible, reuse the carton and recycle it when disposing of the packaging materials.
Installation height: For optimum performance, it is recommended that the rangehood be installed at a height of between 650-750mm from the cooking surface. See Fig. for detailed AS/NZS minimum distance requirements. Rear-mounting to the wall • Using a spirit level, mark a horizontal line on the wall where the rangehood base will be, observing all necessary clearances (Fig. ). Check the required clearances in your cooktop/stove manual and, should they be greater than those specified in Fig.
Top-mounting in a cabinet • Determine where in the top cabinet you want to install the rangehood, then drill 4 holes of Ø4mm at the bottom of the hanging board of your cabinet (Fig. ). Fig. 450mm 30.5mm 215mm • Install the rangehood onto the bottom of the cupboard and secure it in place with four ST4x30mm screws (Fig ). • If there is a space between the wall and the rear of the rangehood, install the rear-underside support mounting bracket (Part ID 2, Installation kit) using the two ST4x8mm screws.
O P E R AT I N G I N S T R U C T I O N S This button toggles between fan speed high, fan speed low and off setting This switch is to turn the rangehood either on or off.
FAQ Troubleshooting guide If you experience problems with your rangehood, or it appears not to be operating correctly, check in the list below for answers to frequently asked questions. If none of the solutions offered help you solve your problem, please contact our after sales support line for advice. Do not attempt to repair the appliance yourself! Problem The extractor fan ceases to function. There is insufficient suction power. Possible Cause Solution There is no electrical current in the network.
O T H E R U S E F U L I N F O R M AT I O N Replacing a light bulb If the light bulb needs replacing, proceed as follows: • Slide out the front panel for easier access and remove the two aluminium mesh flters (Fig. 10). • Carefully turn the bulb in anticlockwise direction and remove (Fig. 11). • Replace the bulb with one of the same type and wattage (E14, 28W), as illustrated below (Fig. 12).
Spare parts Our after sales support centre stocks a wide range of spare parts for the (6/ ' 6 Rangehood. To purchase a part, call the centre on 1300 11 43 57 or email us at support@residentiagroup.com.
P U R C H A S E D E TA I L S For your records, please record details of your purchase below and staple your receipt onto this page. —› Receipt Store details Store name | Address | Telephone | Purchase date | Product details Model no. | Serial no.* | * Note. Your serial number can be found on the inside of the rangehood, underneath the grease filter.
WA R R A N T Y Warranty terms and conditions Cooking appliances (rangehoods) 1. In this warranty (a) ‘acceptable quality’ as referred to in clause 10 of this warranty has the same meaning referred to in the ACL; (b) ‘ACL’ means Trade Practices Amendment (Australian Consumer Law) Act (No.
WA R R A N T Y C O N T I N U E D 5. You will bear the cost of transportation, travel and delivery of the Appliance to and from Residentia Group or its ASR.
Visit Us Online www.esatto.house www.airvolution.space VERSION NUMBER 1.
