User manual

5 INSTALLATION
0463 373 101
- 33 -
© ESAB AB 2015
3. The correct seating of the torch can be checked by means of the window (1). If the torch
has been correctly mounted, no gap should be seen through the window (1).
5.7 Connecting to the wire feeder
5.7.1 Standard RT system
In order to be able to create the connection, the cable assembly must be mounted as
described in the "Installing the cable assembly" section and equipped following "Installing the
wire guide" section. Only then can the central and media connection take place. Proceed as
described below: