User manual

5 INSTALLATION

0463 373 101

- 32 -

1. Torch neck

2. Tip holder

3. Gas diffuser

4. Contact tip

5. Gas nozzle

5.6.2 Aristo RT torch installation

NOTE!

Check the O-rings on the flange of the torch neck before mounting. Replace the

O-rings if damaged or lost. Missing or faulty O-rings will lead to leaks of shielding

gas and coolant.

1. For hollow wrist systems, insert the torch into the torch mount in the correct orientation,

so that the locator pin fits into the slot of the KSC-2 or FLC-2 interface, see (A) in the

illustration below. For standard systems, attach the torch to the RT flange of the cable

assembly, (B) in the illustration below.

Installation is only possible in the correct orientation.

2. Tighten the locking nut of the torch neck.

NOTE!

Only tighten by hand, never use tools or excessive force.