User manual

5 INSTALLATION
0463 373 101
- 24 -
© ESAB AB 2015
1. Hexagon wrench 4 mm
2. 3× M5×12 screws
3. FLC-2 front cover
4. FLC-2 main body
Now position the FLC-2 main body (4) on the adapter flange (6) so that the index pin is
correctly seated. Attach with the screws (5) enclosed.
Fastening torque max. 2.2 Nm (19.5 lbf in).
1. Hexagon wrench 4 mm
4. FLC-2 main body
5. 3× M5×12 hexagon socket screws
6. Adapter flange
5.4 Installing the cable assembly
The cable assembly must be aligned to the intended use in length and design. The type of
cooling for the torch and the cable assembly must be the same (either gas or water cooled
respectively). In order to prevent damage to the torch system and other components, it is
imperative to observe the following instructions.