User manual

5 INSTALLATION

0463 373 101

- 23 -

1. Hexagon wrench 4 mm

2. 3× M5×12 screws

3. KSC-2 front cover

4. Rubber boot

5. KSC-2 main body

Pull off the rubber boot (4) from the main body (5) to the front.

Now position the main body (5) on the adapter flange (7) so that the index pin is correctly

seated. Attach with the screws (6) enclosed.

Fastening torque max. 2.2 Nm (19.5 lbf in).

Reinstall the rubber boot (4) on the KSC-2 main body (5) and make sure it is correctly

located in the grooves on the front and back flange.

1. Hexagon wrench 4 mm

4. Rubber boot

6. 3× M5×12 hexagon socket screws

7. Adapter flange

5.3.2.2 Mounting of FLC-2

Remove the three M5 screws (2) from the front cover (3) of the FLC-2 torch mount and

carefully pull the cover off the main body (4).