User manual

5 INSTALLATION
0463 373 101
- 22 -
© ESAB AB 2015
8. Finally, screw the axial cylinder screw (4) with the Ø9 mm washer (3) into the mounting
flange and tighten firmly.
3. Washer Ø9 mm
4. Axial cylinder screw with hexagon socket M8×16
5. Torch mount
6. Mounting flange journal
7. Feather key; 7a. Groove for feather key
8. Clamping mandrel
9. Mating surface of mounting flange; 9a. Mating surfaces of clamping mandrel
10. Cylinder screw with hexagon socket M6×30
11. Washer Ø22×6.4 mm
5.3.2 Torch mount in hollow wrist system
5.3.2.1 Mounting of KSC-2
Remove the three screws (2) from the front cover (3) of the torch mount and carefully pull the
cover off the main body (5). Take care not to damage the micro switches installed inside the
assembly.