User manual

5 INSTALLATION
0463 373 101
- 21 -
© ESAB AB 2015
Top view
1. Cylindrical pins Ø4×14
2. Cylinder screw with hexagon
socket M6×16
3. Washer Ø9 mm
4. Axial cylinder screw with hexagon
socket M8×16
5. Place the torch mount (5) onto the journal (6) of the mounting flange, paying attention
while doing so to the exact alignment of the feather key (7) and the corresponding
groove (7a).
6. Insert the clamping mandrel (8) into the lateral hole (see illustration) and position it so
that the mating surfaces (9a) of the clamping mandrel rest on the mating surface (9) of
the journal.
7. Then fix the clamping mandrel from the opposite side using the M6 cylinder screw with
hexagon socket (10) and the Ø22 mm washer (11).