User manual

4 TECHNICAL DATA

0463 373 101

- 17 -

Item Description Function

8 Water return (red cap) Water return of heated water from the

torch

9 Control cable plug for safety-off

mechanism

Electrical connection with the KS-2 for the

safety-off signal and nozzle sense

function (if applicable)

4.4.2 Cable assemblies for hollow wrist systems

The Infiniturn cable assembly allows for endless rotation of the torch in both directions. At the

same time, cooling fluid, shield gas, blow out air, the welding power and the signal of the

safety-off mechanism are transferred.

The Helix cable assembly is designed for a rotational range of ±270° from the neutral

position and can be used for simple welding tasks that do not require endless rotation.

The Infiniturn cable assemblies are available in gas and water cooled versions, the Helix

cable assemblies can be universally used for gas or water cooled applications. A Helix cable

assembly operated with a gas cooled torch must not be connected to a water cooling

system.

Item Description Function

1 Flange Interface to the torch mount KSC-2 / FLC-2

2 Index pin Secures the correct orientation of the coupling

3 Control cable plug Electrical connection with the KSC-2 for the

safety-off signal and nozzle sense function (if

applicable)

4 EURO central connector Connection to the wire feeder

5 Control cable Electrical connection for the safety-off signal (from

KSC-2) and nozzle sense function (if applicable)

6 Water return (red cap) Water return of heated water from the torch

7 Water inlet (blue cap) Water inlet for cooling of the torch