User manual

4 TECHNICAL DATA

0463 373 101

- 15 -

Item Description Function

5 Adaptor flange Isolating interface to the robot wrist, must be

selected to fit on the specific robot

6 Index pin For precise alignment to the adaptor flange

7 Connector for control cable Electrical connection for collision signal and nozzle

sense function

8 Micro switch Sensor for collision detection

4.2.2.2 FLC-2 rigid torch mount

Item Description Function

1 Torch neck support Interface to RoboMIG RT torch

2 FLC-2 cover Assembly with interfaces to cable and torch

3 FLC-2 main body Allows for mechanical deflection during a collision

4 Index pin For precise alignment to the adaptor flange

5 Adaptor flange Isolating interface to the robot wrist, must be

selected to fit on the specific robot

6 Connector for control cable

(3-pole)

Electrical connection of the nozzle sense function (if

applicable)

4.3 Adaptor flanges

The adaptor flange needed for installation on the robot arm must be chosen with regard of

the robot type. Adaptor flanges for all suitable standard and hollow wrist systems are

available, see the spare parts list.