Specification

SPARE PARTS WIRE FEED MECHANISM FEED 304
0459 161 990
- 8 -
© ESAB AB 2018
SPARE PARTS WIRE FEED MECHANISM FEED 304
(W) = Wear part C = Component designation in the circuit diagram
Item Qty Ordering no. Denomination Notes C
0459 000 882 Wire feed
mechanism
Includes items HH1 -HH21 and
HH23 -HH41 Type MEM 30 before
serial no. 917-xxx-xxxx
0459 000 896 Wire feed
mechanism
Includes items HH1 -HH21 and
HH23 -HH41 Type MEM 30 from
serial no. 917-xxx-xxxx to serial
no. 236-xxx-xxxx
0459 000 900 Wire feed
mechanism
Includes items HH1 -HH21 and
HH23 -HH41 Type MEM 30 from
serial no. 623-xxx-xxxx
HH1 1 0455 077 001 Drive unit With tachometer, before serial no.
917-xxx-xxxx
13M1,
13G1
HH1 1 0459 808 002 Drive unit With encoder, from serial no.
917-xxx-xxxx to serial no.
236-xxx-xxxx
13M1,
13G1
HH1 1 0465 827 001 Drive unit With encoder, from serial no.
623-xxx-xxxx
13M1,
13G1
HH3 1 0191 496 114 Key Included in item HH1
HH4 1 0215 701 007 Locking washer Included in item HH1
HH5 1 0455 046 003 Gear housing
HH6 1 Screw M6×40
HH7 2 Washer Ø 12/6.4×1.5
HH8 1 0455 048 001 Insulating tube
HH9 1 Nut M6
HH10 1 0467 911 880 Capacitor 0.1 μF 250 V with cable lugs 13C5
HH11 1 Flat pin 6.3×0.8 M6
HH12 4 Screw M6×12
HH13 1 0455 045 001 Insulating sleeve
HH14 1 0455 044 001 Current connection
HH15 1 Screw M8×25
HH16 1 Washer Ø 16/8.4×1.5
HH17 1 Belleville washer Ø 16/8.2×0.9
HH18 1 Nut M6
HH19 2 0368 750 001 Insulating sleeve For cable set
1 0459 224 880 Cable set
HH20 1 0458 918 880 Front flange with
PC-board
Current relay
HH21 1 (W) Outlet nozzle
HH22 4 0153 043 002 Insulating washer