Datasheet

The Twin Soldering Station for SMD and conventional soldering
65 / 190 W heat up rating
Soldering tips for Micr
o tool:
see page 20
ERSA TWIN 80 A
T
echnical data:
TW 803 A electronic station
Supply voltage: 230 V~, 50-60 Hz
Secondary voltage: 24 V~
Rating: 80 W
Control technique: RESISTRONIC
Temperature range: stepless
150°C(300°F) - 450°C(840°F) Ergo tool
150°C(300°F) - 400°C(750°F) Micro tool
Function display: red LED
Cable: 2 m (6.6 ft) PVC with connector
Model: safety insulated, antistatic
according to MIL-SPEC/ESA standards
Ergo tool soldering iron
Voltage: 24 V~
Rating: 75 W / 280°C (545°F)
- 60 W / 350°C (660°F)
Heat up rating: 190 W
Heating time: appr. 60 s (to 280°C/545°F)
Weight (without cable): appr. 60 g (2.4 oz)
Cable: 1.5 m (4.9 ft) highly flexible/
heat resistant, antistatic
Model: antistatic acc. to MIL-SPEC/ESA
Micro tool soldering iron
Voltage: 24 V~
Rating: 30 W / 280°C (545°F)
- 20 W / 350°C (660°F)
Heat up rating: 65 W
Heating time: appr. 50 s (to 280°C/545°F)
Weight (without cable): appr. 25 g (1 oz)
Cable: 1.2 m (3.9 ft) highly flexible/
heat resistant, antistatic
Model: antistatic acc. to MIL-SPEC/ESA
Micro tool / Ergo tool
The electronically temperature-
controlled and fully antistatic ERSA
TWIN 80 A soldering station meets
both conventional and SMD solder-
ing requirements, being equipped
with two separately controlled
soldering tools:
The ultra-light ERSA Micro tool
SMD soldering iron providing 30 W
at 280°C (545°F), and the ergonom -
i-cally designed ERSA Ergo tool
providing 75 W at 280°C (545°F).
The two soldering tools can be
used simultaneously and controlled
separately. This allows you to work
on mixed-technology PCBs and to
avoid tool, tip, and temperature
changes that would otherwise be
necessary. The exceptionally easy-
to-handle and ultra-light (25 g/1 oz)
ERSA Micro tool has a complete
range of SMD soldering tips, from
the 0.2 mm (0.008“) pencil-type
tip to the revolutionary ERSA Micro
Well tip for installing SMT compo-
nents in a matter of seconds.
The ERSA Ergo tool tips range from
the 0.4 mm (0.016“) pencil-type tip to
the 5.0 mm (0.2“) chisel-type tip,
which means it can
satisfy virtually
all soldering require ments. The pro-
ven ERSA RESISTRONIC control
system, which measures the resi-
stance of the heating element, regula-
tes the power applied in accordance
with the soldering requirements. The
potential equalization jack on the front
of the station ensures the safety of the
components. The two multifunctional
holders with their swiveling sponge
containers also function as hot tip hol-
ders. In addition, the holder is de-
signed so that you can use ERSA sol-
dering irons with virtually any commer-
cially available solder fume extraction
system provided you have an adapter.
Order nos.:
TW 80 A TWIN 80 A soldering
station complete
consisting of:
TW 803 A Electronic station
680 CDJ Ergo tool soldering iron
with 832 CD soldering tip
270 BDJ Micro tool soldering iron
with 212 BD soldering tip
A 29 2 x Holder
Spare parts:
68100 J Spare heating element
for Ergo tool
21100 J Spare heating element
for Micro tool
The ultra-fine 0.2 mm (0.008”) tip (212 SD)
The Ergo tool with a fine soldering tip (832 BD)
24
832 UD
832 SD
832 BD
832 CD
832 KD
832 ED
Cross section of an ERSADUR
soldering tip see page 9
Please ask for our tip
sheet with addtional tips!
832 VD
832 PW
832 HD