Certifications 2

Page 2/5
Safety data sheet
according to 1907/2006/EC, Article 31 and 453/2010/EC
Printing date 30.01.2017 Revision: 30.05.2016Version number 2
Trade name: FELDER Tinner "bleifrei"
FELDER Tinner lead-free
Sn97Cu3
(Contd. of page 1)
44.1.3
4.2 Most important symptoms and effects, both acute and delayed
No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
SECTION 5: Firefighting measures
5.1 Extinguishing media
Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray.
5.2 Special hazards arising from the substance or mixture
No further relevant information available.
5.3 Advice for firefighters
Protective equipment:
No special measures required.
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
Not required.
6.2 Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
6.3 Methods and material for containment and cleaning up:
Pick up mechanically.
6.4 Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
SECTION 7: Handling and storage
7.1 Precautions for safe handling
Ensure that suitable extractors are available on processing machines
No special measures required.
Information about fire - and explosion protection:
No special measures required.
7.2 Conditions for safe storage, including any incompatibilities
Storage:
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
Store away from foodstuffs.
Further information about storage conditions:
Store in dry conditions.
Storage class:
13
7.3 Specific end use(s)
No further relevant information available.
SECTION 8: Exposure controls/personal protection
Additional information about design of technical facilities:
No further data; see item 7.
8.1 Control parameters
Ingredients with limit values that require monitoring at the workplace:
7440-31-5 tin
MAK (Germany) vgl.Abschn.IIb
14808-60-7 Quartz (SiO2)
MAK (Germany) alveolengängige Fraktion
7440-50-8 copper
MAK (Germany) Long-term value: 0,01 A mg/m³
als Cu
Regulatory information
MAK (Germany): MAK- und BAT-Liste
recommended monitoring procedures in accordance with 453/2010/EU no. 8.1.2:
7440-50-8 copper: BIA 7755 (D), NIOSH 7301(E), MétroPol Fiche 003(F), MTA/MA-025/A92(ESP)
Additional information:
The lists valid during the making were used as basis.
8.2 Exposure controls
Personal protective equipment:
General protective and hygienic measures:
Avoid skin contact with the liquefied material.
Do not eat, drink, smoke or sniff while working.
Respiratory protection:
Filter P1
(Contd. on page 3)
EU