User manual
Table Of Contents
- 1. Introduction
- 2. Technical data
- 3. For your safety
- 4. Transport, storage and disposal
- 5. Commissioning
- 6. Functional description
- 6.1 Operation
- 6.2 The Work mode
- 6.3 Parameter mode
- 6.4 Configuration mode
- 6.5 Factory settings (“default”)
- 6.6 Contrast
- 6.7 Replacing the soldering tip
- 6.8 Changing the Heating Element
- 6.9 Sensitive components
- 7. Error diagnosis and remedy
- 8. Maintenance
- 9. Replacement parts
- 10. Warranty
i-CON 1 / 37
3BA00180 • 28.04.2008 • Rev. 1
Operating instructions
6.9 Sensitive components
Many components may be damaged by electrostatic discharge (please observe the
warnings on the packaging or ask the manufacturer or supplier). These components
canbeprotectedbyanESD-secureworkplace(ESD=electrostaticdischarge).The
soldering station can be easily integrated into such an environment. The soldering
tipcanbeconnectedathighresistance(220kΩ)totheconductiveworkbaseviathe
potential equalization jack (1).
The soldering station has complete antistatic protection and also meets the require-
ments of the American military standard.
The soldering tips are default hard grounded.
*Hard grounded in accordance with military and ESA standard.