User manual
Table Of Contents
- 1. Introduction
- 2. Technical data
- 3. For your safety
- 4. Transport, storage and disposal
- 5. Commissioning
- 6. Functional description
- 6.1 Operation
- 6.2 The Work mode
- 6.3 Parameter mode
- 6.4 Configuration mode
- 6.5 Factory settings (“default”)
- 6.6 Contrast
- 6.7 Replacing the soldering tip
- 6.8 Changing the Heating Element
- 6.9 Sensitive components
- 7. Error diagnosis and remedy
- 8. Maintenance
- 9. Replacement parts
- 10. Warranty
i-CON 1 / 32
3BA00180 • 28.04.2008 • Rev. 1
Operating instructions
6.6 Contrast
Follow these steps to adjust the contrast of the display to the respective work envi-
ronment:
■
Switch on the station and rotate the i-OP immediately. This activates
the [Contrast] mode.
2
0
_
1
0
_
1
0
_
0
2 s
1
0
_
2
0
2s
0
0,5 s
3
0
_
2
0
_
■
Adjust the desired contrast by turning the i-OP.
■
Conrmyourinputbypushingthei-OP.