User manual
Table Of Contents
- 1. Introduction
- 2. Technical data
- 3. For your safety
- 4. Transport, storage and disposal
- 5. Commissioning
- 6. Functional description
- 6.1 Operation
- 6.2 The Work mode
- 6.3 Parameter mode
- 6.4 Configuration mode
- 6.5 Factory settings (“default”)
- 6.6 Contrast
- 6.7 Replacing the soldering tip
- 6.8 Changing the Heating Element
- 6.9 Sensitive components
- 7. Error diagnosis and remedy
- 8. Maintenance
- 9. Replacement parts
- 10. Warranty
i-CON 1 / 31
3BA00180 • 28.04.2008 • Rev. 1
Operating instructions
6.5 Factory settings (“default”)
The following lists shows the settings with which the station was programmed in our
works.Thesesettingscanberestoredviathe“defaultfunction”inthe“Congura-
tion” mode. The only exception is the setting of the password which is not deleted
via the default function.
Congurationmode
Parameter Settings
↑Tempwindow 20 °C
↓Tempwindow 20 °C
Shut down 000
Unit number 01
Process alarm Off
Password 0000 (is not deleted via the default function)
Unit °C
Language EN
Parameter mode
Parameter Settings
Tempset (°C) 360
Calibrate (°C) 0
Tip-Offset 1
Power level Medium
Standby-Time (min) 5
Standby-Temp (°C/°F) 250